A Highly Potent and Cellularly Active β‐Peptidic Inhibitor of the p53/hDM2 Interaction

New and improved : The incorporation of a 6‐chlorotryptophan (6‐Cl‐Trp) into a β‐peptide (M)‐3₁₄ helix leads to a high‐affinity hDM2 inhibitor, as demonstrated by fluorescence fluctuation analysis at single molecule resolution. When conjugated to penetratin, the newly derived hDM2 binder specifically inhibits tumour cell growth in vitro.

     

Alumina Grown during Deposition of Thermal Barrier Coatings on NiCrAlY

The microstructure of Al₂O₃ formed by oxidation of a model NiCrAlY alloy during electron-beam physical vapor deposition of ZrO₂–7.6 mol% YO_1.5 is examined and compared with that formed on the bare substrate. The growth rate, morphology, and chemical composition of the oxide vary among the different constituents of the alloy surface and are further influenced by the O₂ partial pressure and the physical presence of the thermal barrier coating (TBC) layer. These differences, however, are largely limited to the outer oxide layer. The interplay between the TBC and the growing oxide leads to the formation of a fine-grain Al₂O₃–ZrO₂"mixed zone" within the thermally grown oxide. A mechanism is outlined to explain this behavior, based on the dissolution of ZrO₂ in a transient Al₂O₃ structure growing by outward diffusion of Al, and its subsequent reprecipitation when the metastable phase transforms to the stable α-Al₂O₃ form.     

CNT Based Elastomer‐Hybrid‐Nanocomposites with Promising Mechanical and Electrical Properties

CNT based elastomer‐hybrid‐nanocomposites prepared by melt mixing have been investigated showing promising results in technologically relevant electrical, mechanical, and fracture‐mechanical properties. It is demonstrated that the incorporation of CNT in silica‐filled natural rubber results in a good dispersion of the CNT. The materials show an enhanced mechanical stiffness and tensile strength, an increased modulus, and a high electrical conductivity with quite low amounts of CNT, though the tear resistance under dynamical loading is slightly reduced. Using DMA and dielectric spectra, a better understanding of the conduction mechanism, the polymer/tube interaction, and the filler networking in CNT nanocomposites is achieved.

     

Modelling Interactions Between Lot-Scale Decentralised Water Infrastructure and Urban Form – a Case Study on Infiltration Systems

Modelling the design and implementation of urban water infrastructure (particularly decentralised systems) for strategic planning and policymaking requires detailed information of the spatial environment and quantitative knowledge of social preferences. Currently available models, however, mostly use land use, population and impervious cover data without much regard for detailed urban form or society. This study develops an algorithm for determining urban form from minimal spatial data input by incorporating local planning regulations. The interaction between urban form and implementation of lot-scale infiltration systems under different social, biophysical and climate constraints is then investigated, firstly by looking at how this varies in different residential land uses and subsequently in a case study of a typical Melbourne residential subdivision of mixed land uses. Feasibility of infiltration and its downstream impact (runoff volume, frequency and pollution) were assessed for a range of social preferences (quantified as allowable garden space) and climate scenarios (30 % increase/decrease in rainfall and evapotranspiration). Performance indicators were determined through long-term simulation with the MUSIC software. Results show how different biophysical, planning, social and climate conditions affect infiltration feasibility as well as system performance. High infiltrating soils, for example, allow smaller, well-performing and socially less-imposing systems. Low infiltrating soils lead to larger system sizes, occupy much of the allotment’s garden space, but nevertheless provide the benefit of runoff frequency reduction. Overall, climate impact was not significant except for areas with poorly infiltrating soils. Joint consideration of social, planning, climate and water management aspects potentially allows more efficient policymaking, as an array of system configurations can be tested against different multi-faceted scenarios. Such models can help facilitate better participatory planning and policymaking.     

Component allocation and job sequencing for two series-connected SMD placement machines

The problem of component allocation and sequencing PCB assembly jobs for two series-connected SMD placement machines is addressed. With the allocation of components, a balancing of the workload per PCB for the two machines should be achieved. Furthermore, when switching from one type of PCB to another, setup times must be considered. Two heuristic procedures are developed and tested in extensive numeric analyses of a number of realistic case models. The problem examined and the database used represent a concrete case of an industrial application in which very diversified small jobs are to be processed.     

Probing the pore space of geothermal reservoir sandstones by Nuclear Magnetic Resonance

Pulsed-Field-Gradient–Nuclear Magnetic Resonance (PFG–NMR) is an interesting method to determine microscopic but volumetrically averaged properties of pore space. In the present paper a number of sandstone samples, taken from drill cores of geothermal wells in North Germany, have been investigated. The time-dependent self-diffusion of water molecules in their confined geometry is used to probe the pore space. The short-time behaviour of the self-diffusion coefficient (anomalous diffusion) in the porous matrix allows the determination of the surface-to-pore volume ratio S/V_p. At long diffusion times, molecules scout the tortuosity of the interconnected pore space of the sandstones. The NMR results were compared with data from petrographic image analysis (PIA), adsorption experiments and electric conductivity measurements. The PFG–NMR measurements give surface-to-pore volume ratios S/V_p that are comparable to those estimated with the petrographic image analysis. The tortuosities match in most cases data from conductivity measurements, so the PFG–NMR is regarded as an appropriate tool to determine this quantity. The results are not influenced by the adherence of ‘scout-molecules’ to the pore walls. The surface-to-pore volume ratios and tortuosities were used to calculate permeabilities of the systems of interest, which were in good agreement with measured core-plug permeabilities. Results of additional NMR relaxation experiments are used to obtain adsorption isotherms for cations at active surface sites.